Circuit-test DMR-1100 Manual do Utilizador

MACKENZIE LABORATORIES, INC.1163 Nicole CourtGlendora, California 91740 • USATel: (909) 394-9007 • Fax: (909) 394-9411Web: www.macklabs.comEmail: info

104.2. Pauses - S3, S4, S5Switches 3-5 select the nominal pause time betweensuccessive message plays. The pause period can be setfor 1, 3, 5, 7, 10,

114.5. Reset - S8If Switch 8 is placed in the ON position, the system willautomatically reset one minute after delay.If switch 8 is left in the OFF p

126. EXTERNAL WIRING

137. SW1

148. AUX. CONNECTOR WIRING SINGLE MESSAGE

159. AUX. CONNECTOR WIRING MULTI PLEMESSAGE

1610. AUX CONNECTOR WIRING U1022 SINGLEMESSAGE

17

18

19

2Table of Contents1. INTRODUCTION ... 32. FEATURE DESCRIPTIONS ...

20Warranty & Registration Card for theDMR-PD-006Date: ______________ Serial No.:

21____________________________________________________________Return AddressMackenzie Laboratories, Inc.1163 Nicole CourtGlendora, CA 91740 USAMACKE

31. INTRODUCTIONThe DMR-PD-006 provides the following features:1. START(S) (multiple inputs for random access), STOPand TEST functions.2. Audio Mes

42. FEATURE DESCRIPTIONS2.1. START COMMANDSThere is a total of 6 START inputs available. Each STARTCOMMAND requires a momentary (250 ms minimum)conta

52.5. AUDIO MESSAGEMessage storage is provided by up to four on boardEPROMS. Total message time available is 30.0 secondsat a bandwidth of 3.4KHz.

62.8. ON-BOARD SWITCH OPTIONSAll options are controlled by an 8-position DIP switch.a) Message Repeats - S1, S2 - The basic operationof the unit is

72.10. SUPERVISION (ERROR/FAIL Relay)a) If power is available to the unit,b) and if the Microprocessor is operational,c) and if the audio memory is i

8MessageMemory: Maximum playing time of 7.5 sec per EPROM @3.4 KHz and a maximum of 4 EPROMs per unit.Model Length # o

9Input/OutputConnectors: Two connectors. One is a 20 position double rowcontact housing pre-assembled at factory with pigtail 10 position used for co